ASP/CSP Self Assessment Quiz.

ASP/CSP Self Assessment Quiz

ASP/CSP Self Assessment Quiz will help those who want to make preparation for certification exams managed by the Board of Certified Safety Professionals (BCSP) to become an Associate Safety Professional (ASP) or Certified Safety Professional (CSP).

It will Test your knowledge with short quizzes. ASP/CSP Self Assessment Quiz will help you to find out your preparation current Status that you are ready to achieve Safety Genius Status or you needs to keep studying.

This Quiz contains 20 random questions sourced from the Rayyan Safety Training Institute Free Study Question Program.

0 votes, 0 avg
898

10 minutes

10 minutes


Created by shamshi

ASP/CSP Self Assessment Quiz-1

ASP/CSP Self Assessment Quiz: Are you want to Check your Knowledge in Health, Safety and Environment Field? Are You Want to Check you ready or not For ASP/CSP Exam. You are at right Place. Start the Quiz and Check your Self.

1 / 20

The best fire prevention practices focus on four primary sources of ignition, including:

2 / 20

A worker’s exposure to an airborne contaminant in any 8-hour work shift of any 40-hour work week is known as the:

3 / 20

Which program defines the operation, management, and structural components through the life cycle of an emergency fire incident?

4 / 20

What happens to the sling tension of a rigged load when the sling angle from the vertical is increased?

5 / 20

Friction-generated fire hazards are best avoided by using:

6 / 20

Which is an administrative control aimed at improving the physical capabilities of an individual aiming to reduce injuries?

7 / 20

Which is used to collect information from safety training attendees to ensure you provide the right training?

8 / 20

Measuring physical and mental capabilities and assuring the safety of the worker and the public is the purpose of:

9 / 20

The two types of fall protection systems are:

10 / 20

Calculate the standard deviation using the following sample: 7, 12, 18, 5, 6, 6, 14, 11 and 19.

11 / 20

Workers should receive training on which components regarding workplace violence?

12 / 20

Boyle’s law is expressed as:

13 / 20

The three basic choices for applying anthropometric data to the design of the work place include:

14 / 20

Calculating radioactive decay requires information on the initial quantity of materials, quantity of material at the time of measurement, time interval between the measurements, and the

15 / 20

Fire protection best practices for the initial evaluation of life safety consideration in building design include:

16 / 20

With an increased focus on communication, production and quality, and safety and health management programs, management continues to evolve and now includes significantly more involvement from which level of management?

17 / 20

The concept that adults learn differently than children is defined as:

18 / 20

Ensuring your business will survive man-made or natural disasters often depends on the adequacy of the company’s:

19 / 20

A truck is traveling at 68 MPH (109.4 KPH), how many feet (meters) per second is it traveling?
1.47 fps = 1 MPH (1 m/s = 3.6 KPH)

20 / 20

The statistically determined time interval for a radioactive isotope to decay by 50% is called the:

Your score is

The average score is 44%

0%

340

10 minutes

10 minutes


Created by shamshi

ASP/CSP Self Assessment Quiz-2

ASP/CSP Self Assessment Quiz:
Are you want to Check your Knowledge in Health, Safety and Environment Field? Are You Want to Check you ready or not For ASP/CSP Exam. You are at right Place. Start the Quiz and Check your Self.

1 / 20

Often described as predictive, preventative, or proactive, which are tools designed to measure the improvement of safety and health initiatives?

2 / 20

Ergonomic tasks demands typically fall into three categories including:

3 / 20

The PRIMARY reason for the globally harmonized system for hazardous chemical usage is to:

4 / 20

Construction of fire walls, distancing, and partitioning of flammable materials are examples of:

5 / 20

Examples of passive hazardous materials exposure control design include:

6 / 20

The PRIMARY solution to avoiding lifting injuries is to:

7 / 20

Which kind of energy must be controlled / isolated or eliminated during maintenance and service?

8 / 20

Workers who show signs of reduced blood flow, lowered skin temperature, and tingling, numbness or pain may be experiencing symptoms of:

9 / 20

The hierarchy of controls for safety and health hazards is typically represented by:

10 / 20

Radiation strength or activity is often measured in:

11 / 20

A company using the best accepted practices in their environmental management systems program would incorporate:

12 / 20

Calculate the WBGT index with the known information of: outdoor globe temperature of 111˚F (43.9˚C), wet-bulb temperature of 115˚F (46.1˚C), dry-bulb temperature 114˚F (45.6˚C). WBGT = 0.7 WB + 0.2 GT + 0.1 DB.

13 / 20

When disposing of hazardous wastes, secure landfills require which type of protection?

14 / 20

Periodic evaluations and surveys of work practices are which type of indicators of an organization’s safety performance?

15 / 20

Which is the mean of a group of safety practitioners who sit for the ASP exam and receive the following scores:
76, 88, 94, 55, 75, 85, 88, 64, 82, 73, 72, 70?

16 / 20

Biological hazard exposures controlled by safe work practices, safety equipment use, and facility design are examples of:

17 / 20

Evaluating training outcomes is often defined as Kirkpatrick’s four levels of evaluation, which include:

18 / 20

Rapid, negative effects on the central nervous system are often caused by acute overexposure to:

19 / 20

Which hazard control methodology can occur before, during, or after a process, especially in a more dynamic facility?

20 / 20

Although traditionally focused on technical expertise, the successful safety professional must now increase their skill sets in:

Your score is

The average score is 55%

0%

0%
233

20 minutes

20 minutes


Created by shamshi

ASP/CSP Self Assessment Quiz-3

ASP/CSP Self Assessment Quiz:
Are you want to Check your Knowledge in Health, Safety and Environment Field?

Are You Want to Check you ready or not For ASP/CSP Exam.?

You are at right Place. Start the Quiz and Check your Self.

1 / 40

Rust, the most common kind of corrosion, is the action of which element on iron or aluminum?

2 / 40

Biological hazards are often assessed by evaluating:

3 / 40

Gravity settlers, cyclones, and electrostatic precipitators are examples of:

4 / 40

Detoxifying waste using incineration is an example of a(n):

5 / 40

A comprehensive safety radiation program should take all of which grouping of variables into account?

6 / 40

Accident investigations, injury logs, near miss reports, and first aid cases are:

7 / 40

The first step to establishing a confined space entry program is to:

8 / 40

Fire extinguishment, ventilation, and fire department notification are all considered:

9 / 40

The PRIMARY characteristics safety professionals need to consider when evaluating hazardous waste include:

10 / 40

Providing a low resistance path for current is commonly called:

11 / 40

Isopropyl alcohol has a flammability range between 2% and 12%; therefore, the Upper Explosive Limit is:

12 / 40

Which disease often affects the lungs of construction workers doing remodeling and repairs of bridges and older structures?

13 / 40

Your company wishes to spend $22,000 on fall protection harnesses at a cost of $300 each. These special harnesses are designed to make workers more efficient, and the manufacturer estimates your exposed workers will save 1 hour per week based on the increased ease of use of the equipment. Assuming you have 50 exposed workers using the equipment every day for 50 weeks a year, and their average wage is $45/hour, how long would it take to recoup your investment?

14 / 40

 Training and education can occur in many ways other than lectures. Group or facilitated training can occur during:

15 / 40

The proper angle to place a ladder to ensure adequate safety is:

16 / 40

The best practices drivers should be trained to complete after an accident (when safe to do so) include:

17 / 40

Which element is not part of a disaster preparedness plan?

18 / 40

Which is the systematic approach of analyzing what can go wrong with a product, process, or system?

19 / 40

Which safety management system involves everyone from operators and mechanics to facility managers who assist the safety professional in analyzing the risk associated with production?

20 / 40

Noise reduction programs require a critical analysis of the:

21 / 40

Which is the operating current of a 75 Watt, 115 Volt Direct Current (DC) electric motor?

P = I × V

22 / 40

Radiation strength or activity is often measured in: 

23 / 40

Physical, chemical, and biological characteristics are generally used to determine water:

24 / 40

Which international best practices program advocates an environmental management program that includes policy, planning, implementation, checking and correction, and management review?

25 / 40

Human-machine interface design principals should incorporate:

26 / 40

Although usually meeting minimum legal requirements for construction, which extreme events can still lead to extreme fire devastation?

27 / 40

The cradle to grave oversight of the hazardous waste journey from generator to disposal is part of which system?

28 / 40

Which is the probability of failure of event 1 or event 2 or event 3? Failure rate of event 1 is 0.4, failure rate of event 2 is 0.1, and failure rate of event 3 is 0.4.

P(Total) = P1 + P2 + P3 - (P1 × P2 × P3)

29 / 40

A heavy box that weighs 147 lbs (66 kg) must be pushed across the floor to another side of the work area. The coefficient of friction of the floor is 0.32. How much force is required to move the box?

F = uN

30 / 40

Air sparging, soil evacuation, and dual phase extraction are examples of which kind of hazardous material engineering control?

31 / 40

Combustion requires which condition(s) to occur?

32 / 40

Improved fire detection systems in industrial applications rely on which to engage protective systems?

33 / 40

You company makes widgets at a 2% profit margin. Counting only direct loss costs for the last year of $12,000, how much more money must the company make to cover those loss costs?

Revenue Required  = (Total Cost) / (% Profit Margin/100)

34 / 40

Safety professionals must employ many different communication strategies to effectively improve safety and health. One key to negotiating change is to:

35 / 40

Current equals voltage divided by the:

36 / 40

Strength, reflexes, and eye-hand coordination tend to decrease with a(n):

37 / 40

 Hedging, insurance pools and hold harmless agreements are all examples of:

38 / 40

A hazard analysis is:

39 / 40

Which is the term representing the death of half the research animal population?

40 / 40

Minimum fleet safety management programs for light vehicle operation include:

Your score is

The average score is 56%

0%

12 thoughts on “ASP/CSP Self Assessment Quiz.”

Leave a Comment

Your email address will not be published. Required fields are marked *

Open chat
May I Help You?
Greetings Of the Day.
Welcome to Rayyan Safety Training Institute.